Friday, May 20, 2011

How I made 15 cheap Meltaguns - Conversion How To

Well I needed 15 meltaguns for my Necro 8th Mechanized Guardsman army, and we all know how hard (and expensive!) meltaguns are! So rather than scratch my head wondering how I was able to find (and afford) 15 meltaguns I decided to scratch build my own.
First I took the many flamers found on the Cadian Sprue and cut it up as seen here.
Next I got some strip styrene from my local art shop (Art Friend in Singapore) for about $4.
I then cut them to approx 0.7cm in length, I used an actual Meltagun model for measurement.
*notice the size labelled on the packaging should you want to do the same as me.
After that I filed both ends to ensure a flat surface for a good fit.
Next
Here's how it looks after glueing!
p.s I missed photographing a step after this, which was to drill out the end of the meltagun barrel.

A comparison shot next to a metal "original" cadian Meltagunner!!

-Those who want more Melta's go make your own!

4 comments:

  1. very good, you draw the exhaust on the scratch build barrel?

    ReplyDelete
  2. Sweet, nice and simple. Great job.

    ReplyDelete
  3. Yep just a few careful and strategically placed black lines to finish it off.

    ReplyDelete
  4. Haha I like it!
    I feel for Guard players bitz-wise, they need so many meltas...

    ReplyDelete

LinkWithin

Related Posts Plugin for WordPress, Blogger...